[CA] [CA11] Axiom Pro transdcer compatibility

[[email protected]]

Upgraded my C120 MFD to an Axiom Pro 12 RVX and would like to add STW (speed thru water) from a P66 transducer (E66054). I have a SeaTalk 5 way connector port available and both Raynet ports available on the Axiom MFD. The P66 transducer was formerly interfaced to the C120 thru a DSM300.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum ftenkel,

Should your model of P66 transducer have been directly mated to the Transducer socket of the DSM300, then it may be adapted (part # A80496) to be mated to the 1kW transducer socket of the Axiom Pro RVX MFD. Doing so will not only add speed through water data to the system, but will also add 50kHz and 200kHz fishfinder sonar channels to the system.