Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] UAV integration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] UAV integration
07-30-18, 07:44 PM (This post was last modified: 07-31-18 03:37 PM by Chuck - Raymarine - Moderator.)
Post: #1
Bugler Offline
Junior Member
**
 		Posts: 5
Joined: Dec 2017
Reputation: 0
[CA11] UAV integration
Has anyone figured out how to connect their Mavic yet? I read the new PDF instructions and it gives no indication how to connect, only that you can enable the icon once you do connect the drone.
Find all posts by this user
Quote this message in a reply
08-02-18, 11:14 AM (This post was last modified: 08-14-18 10:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] UAV integration
Welcome to the Raymarine Forum Bugler,

The information which you have inquired about may be found within the LightHouse 3.6 with Axiom UAV PDF file attachment within the FAQ addressing the Axiom UAV feature and more specifically within Chapter 15.6 Getting started of the LightHouse 3.6 Advanced Operation Instructions. Particular attention should be paid to registering the MFD's UAV app (requires that the MFD be connected via Wi-Fi to a Wi-Fi hotspot having access to the Internet) prior to using the feature. Simply running and then closing the UAV app after a few seconds while the MFD is connected to the Internet will automatically register the MFD's UAV app.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication