Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Navionics upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Navionics upgrade
10-20-18, 10:43 PM (This post was last modified: 10-22-18 01:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
bensarro Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2017
Reputation: 0
[CA11] Navionics upgrade
Hello, I have an E80 updated to 5.69. Id like to run a new Navionics card, my unit accepts CF cards. Im not the swiftest with software so this is all very confusing to me. It was suggested that I look at Navionics CF/NAV+NI does anyone know if I can run this software effectively and in a user freindly manner? Thanks
Find all posts by this user
Quote this message in a reply
10-22-18, 02:15 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Navionics upgrade
Welcome to the Raymarine Forum bensarro,

Please click here to view a FAQ addressing this subject. For those who may be a bit light on computer skills, it is recommended that Radar Marine be contacted to order a Navionics+ chart card which will in turn be erased and then populated by Radar Marine with Navionics cartography for the geographic area in which the vessel will operate.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication