Raymarine forum / Raymarine Forums / Multifunction Displays v / [LW] [LW11] Will powering on an axiom 9 without transducer damage them?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Will powering on an axiom 9 without transducer damage them?
12-02-18, 01:28 PM (This post was last modified: 12-03-18 07:23 AM by Louise - Raymarine - Moderator.)
Post: #1
Wstandis Offline
Junior Member
**
 		Posts: 15
Joined: Jul 2017
Reputation: 0
[LW11] Will powering on an axiom 9 without transducer damage them?
Just like the title states. I was curious if turning on a axiom nine without the transducer connected will damage the unit in anyway?

my boating season is over but I’m bored and thinking about updating my software
Find all posts by this user
Quote this message in a reply
12-03-18, 07:25 AM
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] Will powering on an axiom 9 without transducer damage them?
Good afternoon Wstandis,

You will not damage the Axiom 9 by powering the unit on without the transducer attached. You can perform a software update and the sonar board software will also update without the transducer attached.

Best Regards
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication