Raymarine forum / Raymarine Forums / Networking / System Integration v / [DG] [DG11] Seatalk Voltage

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Seatalk Voltage
02-18-19, 03:43 AM (This post was last modified: 02-19-19 12:37 PM by Derek - Raymarine - Moderator.)
Post: #1
Richyrich06 Offline
Junior Member
**
 		Posts: 3
Joined: Jan 2019
Reputation: 0
[DG11] Seatalk Voltage
I am trying to connect St40 to my C140W via the 140W is 24volts
Can the ST40 run from the 140W seatlk power or do i need to provide its own supply ?
What voltage do i need to connect to the seatalk 24 or 12 ?
Cheers
Find all posts by this user
Quote this message in a reply
02-19-19, 12:38 PM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] Seatalk Voltage
Hi Richyrich06,

SeaTalk is only ever 12v, even though the C140W is running off 24v, so you will need a provide an external 12v suppy to the ST40 for SeaTalk.

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication