Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST7001+ Compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST7001+ Compatibility
02-27-19, 03:19 PM (This post was last modified: 02-27-19 04:51 PM by Chuck - Raymarine - Moderator.)
Post: #1
PHINNROS Offline
Older Sailor and Builder
**
 		Posts: 11
Joined: Feb 2019
Reputation: 0
[CA11] ST7001+ Compatibility
Can the ST7001+ control head be used with the new ACU-200
Find all posts by this user
Quote this message in a reply
02-27-19, 04:56 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST7001+ Compatibility
Welcome to the Raymarine Forum PHINNROS,

While a ST6xxx/ST7xxx/ST8xxx autopilot control heads may be used to command an Evolution autopilot into and out of Standby, Auto, and Track modes as a second station autopilot control head (much as a wireless autopilot remote may do), they cannot be used to configure the autopilot's settings. The latter would require that the Evolution autopilot be interfaced to a p70S/p70RS/p70/p70R autopilot control head or MFD running the latest LightHouse 3 or LightHouse II software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication