Raymarine forum / Raymarine Forums / Marine Cameras v / [CA] [CA11] CAM100 normal vs reverse picture

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CAM100 normal vs reverse picture
03-21-19, 12:15 PM (This post was last modified: 03-21-19 01:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
Vesa Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2019
Reputation: 0
[CA11] CAM100 normal vs reverse picture
Hi,

I am using e165 multifunction display with cam100. My idea was to use cam as reversing cam, but when made my purchase ended up having a cam with normal picture instead of reversing.
Is there a way to configure/swap the picture to reversing from normal?
Find all posts by this user
Quote this message in a reply
03-21-19, 01:13 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] CAM100 normal vs reverse picture
Welcome to the Raymarine Forum Vesa,

Unlike IP video streams which may be reversed by using a PC to configure the IP camera's setting, composite (NTSC/PAL) video cameras cannot be configured by their owners to display a reversed image as one would desire for a backup camera. For this reason, Raymarine offers normal and reverse image versions of its CAM100 and CAM50 composite video marine cameras:
E03021 CAM100 CCTV Day and Night Reverse Image Video Camera (NTSC format)
E03020 CAM100 CCTV Day and Night Reverse Image Video Camera (PAL format)
E03018 CAM50 CCTV Reverse Image Camera (NTSC format)
E03019 CAM50 CCTV Reverse Image Camera (PAL format)
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication