Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Replacing M78712 speed transducer (ST60 Tridata)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replacing M78712 speed transducer (ST60 Tridata)
03-26-19, 09:28 AM (This post was last modified: 03-26-19 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
Sailor Brian Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2016
Reputation: 0
[CA11] Replacing M78712 speed transducer (ST60 Tridata)
The Tridata reads 0, even when I twirl the paddle wheel. This follows some intermittent failures. Searched but couldn't find this in forum.

For an ST60 Tridata, is there a current speed transducer replacement? Will it work with the existing thru hull housing or must that also be replaced. Will an old E26031 work with an ST60 and be compatible with the thru hull?

Thanks.
Find all posts by this user
Quote this message in a reply
03-26-19, 01:25 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Replacing M78712 speed transducer (ST60 Tridata)
Welcome to the Raymarine Forum Brian,

Please click here to view a FAQ addressing where one may find the requested information.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication