Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] e80 or e9 data to an ipad for race app

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e80 or e9 data to an ipad for race app
03-28-19, 04:43 PM (This post was last modified: 03-29-19 10:02 AM by Chuck - Raymarine - Moderator.)
Post: #1
Markbrewer Offline
Junior Member
**
 		Posts: 2
Joined: Aug 2017
Reputation: 0
[CA11] e80 or e9 data to an ipad for race app
I have an e80 that obtains wind, depth and speed data from my Tacktick mn100 system. I would like to use the data on my ipad for iRegatta2.
Can I attach a Bluetooth device to the e80 that would be visible to the ipad?
Would an e9 upgrade have built-in Bluetooth visible to the ipad?
Would appreciate any knowledgeable advice.
Mark
Find all posts by this user
Quote this message in a reply
03-29-19, 10:17 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] e80 or e9 data to an ipad for race app
Welcome to the Raymarine Forum Mark,

When operating with v5.69 E-Series Classic MFD software, the MFD supports SeaTalk, NMEA 0183, and limited SeaTalkng/NMEA 2000 communications software. There are a number of third party products in the market supporting SeaTalk to WiFi, NMEA 0183 to Wi-Fi, and NMEA 2000 to Wi-Fi communications (ex. Brookhouse iMux, Yacht Devices YDWR-02, Digital Yacht WLN10, etc.).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication