[CA] [CA11] Autopilot components needed?
|
04-05-19, 11:27 AM
(This post was last modified: 04-08-19 03:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Autopilot components needed?
Exploring the idea of adding an autopilot to my 26ft Single outboard hydraulic steered boat. I currently have an eS127 and Axiom MFD both running LH3 as well as a EV-1 sensor core.
From reading I would also need the following components to complete my autopilot: ACU-150 Type-1 Hydraulic Drive Unit (M81120) Evolution Cable Kit (R70160) Now would I need a p70s (E70328) or p70Rs (E70329) autopilot control head? Am I missing anything? Thanks in advance. Jack - MS Gulf Coast Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 - Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers. |
|||
04-08-19, 03:27 PM
Post: #2
|
|||
|
|||
RE: [CA11] Autopilot components needed?
Welcome to the Raymarine Forum MSjack,
For most powerboat / Evolution autopilot use cases, an autopilot control head would not be required if the system features MFD running LightHouse 3 software. However, should it desired to use the Evolution autopilot's Fishing Patterns feature, then it would be necessary to add an autopilot control head to the system. This said, it is considered to be a best installation practice to install an autopilot control head at each steering station to support the quickest interaction with the autopilot. |
|||
04-09-19, 08:50 AM
Post: #3
|
|||
|
|||
RE: [CA11] Autopilot components needed?
Thanks Chuck.. I appreciate it.
Jack - MS Gulf Coast Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 - Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers. |
|||
04-09-19, 09:43 AM
Post: #4
|
|||
|
|||
RE: [CA11] Autopilot components needed?
You're welcome.
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)