Raymarine forum / Raymarine Forums / Instruments v / [LW] [LW11] Connecting Speed Temp Transducer to ST60+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connecting Speed Temp Transducer to ST60+
04-23-19, 10:06 PM (This post was last modified: 04-24-19 06:55 AM by Louise - Raymarine - Moderator.)
Post: #1
kdidriksson Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2019
Reputation: 0
[LW11] Connecting Speed Temp Transducer to ST60+
I have a retractable transducer (ST8000, I think) I want to connect to a ST60+ instrument. They don't seem to connect directly. Do I need to go through an intermediary device, like a transducer pod? Also, I plan to connect both to a Seatalk NG network with a MFD at some point. What do I need to get the transducer and ST60+ talking to each other?
Thanks,
Kris
Find all posts by this user
Quote this message in a reply
04-25-19, 08:00 AM
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] Connecting Speed Temp Transducer to ST60+
Dear kdidriksson,

What manufacturer is the ST8000 transducer?

What St60+ instrument are you trying to connect this to?

We have never had a transducer known as the ST8000 only the ST800. It is probably not a compatible transducer for the ST60+ and the ST60+ has never had a transducer POD.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication