a/c/e/eS/gS-Series MFD updated w/v16.47 unable to update remote devices

[Chuck - Raymarine - Moderator]

a/c/e/eS/gS-Series MFD updated w/v16.47 unable to update remote devices

The a/c/e/eS/gS-Series MFDs which have been updated with v16.47 a/c/e/eS/gS-Series MFD software require a different set of autorun files to remotely update other Raymarine products than did a/c/e/eS/gS-Series MFDs operating with earlier versions of a/c/e/eS/gS-Series MFD software. Through a web site omission on Raymarine's part, the software update downloads for Raymarine products which have been designed to be remotely updated via an a/c/e/eS/gS-Series MFDs lack the autorun files required for an a/c/e/eS/gS-Series MFD (v16.47) to remotely update some products. This problem is expected to be updated shortly.

In the interim, it is recommended that the software update zip file for the device to be updated be dowloaded to your computer, that its contents be extracted/copied, and that they then be pasted into the root level directory of a microSD memory card. After doing so, the autorun files attached to this thread should be downloaded and pasted into the root level directory of the microSD memory card, replacing those which had previously been pasted into the root level directory of the microSD memory card.

RAYFAQ#