Raymarine forum / Raymarine Forums / Marine Cameras v / [CA] [CA11] CAM220IP viewing on PC screen

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CAM220IP viewing on PC screen
06-03-19, 12:39 PM (This post was last modified: 06-04-19 03:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
W8N4SUN Offline
Junior Member
**
 		Posts: 4
Joined: Jun 2017
Reputation: 0
[CA11] CAM220IP viewing on PC screen
What software do you recommend to be able to view multiple CAM220s on a one PC Windows screen? Meaning not going through a Raymarine MFD, but being able to view multiple camera IP addresses on a PC Windows screen. Thanks
Find all posts by this user
Quote this message in a reply
06-04-19, 03:15 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] CAM220IP viewing on PC screen
Welcome to the Raymarine Forum W8N4SUN,

As Raymarine has not developed and tested the CAM200IP for use with computer systems (other than to configure the cameras), we have not performed evaluations of IP camera monitoring / security software supporting the feature which you have inquired about. You may want to check out producers of security products for recommendations.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication