Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Is USB the same as SD for updates?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Is USB the same as SD for updates?
07-16-19, 09:58 AM (This post was last modified: 07-19-19 12:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
organum Offline
Junior Member
**
 		Posts: 9
Joined: Aug 2017
Reputation: 0
[CA11] Is USB the same as SD for updates?
I have an Axiom 12 with external SD/USB adaptor since it is impossible to get to the back of the unit without removing a cabin roof.

I am currently on version 9 and trying to update to 10 just issued. In the past I had difficulties with various MicroSD adaptors not recognising the memory card so now always use the one Navionics supply. This has been fine but today I tried to use the USB socket but without success.

Are there any special rules for using USB or even basically does it work?

Many thanks

Richard
Find all posts by this user
Quote this message in a reply
07-19-19, 12:36 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Is USB the same as SD for updates?
Welcome to the Raymarine Forum Richard,

What make/model of USB memory card reader have you interfaced to the MFD?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication