Raymarine forum / Raymarine Forums / General Discussions v / [CA] [CA11] ST 1000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST 1000
12-02-19, 08:11 PM (This post was last modified: 12-03-19 01:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
jerry111 Offline
Junior Member
**
 		Posts: 8
Joined: Dec 2018
Reputation: 0
[CA11] ST 1000
Hi, is it ok to use loctite on the tiny screws where the power supply wires attach to the power socket? tnx
Find all posts by this user
Quote this message in a reply
12-03-19, 01:50 PM (This post was last modified: 12-03-19 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST 1000
Welcome back to the Raymarine Forum jerry111,

No prior reports have been received via this Forum of these screws loosening. Accordingly, this action would typically be considered unnecessary.
Find all posts by this user
Quote this message in a reply
12-03-19, 02:20 PM
Post: #3
jerry111 Offline
Junior Member
**
 		Posts: 8
Joined: Dec 2018
Reputation: 0
RE: [CA11] ST 1000
thank you so much
Find all posts by this user
Quote this message in a reply
12-03-19, 03:56 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST 1000
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication