Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Chart sharing between two Axioms

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Chart sharing between two Axioms
12-29-19, 11:43 AM (This post was last modified: 12-30-19 11:36 AM by Chuck - Raymarine - Moderator.)
Post: #1
demerittj Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2019
Reputation: 0
[CA11] Chart sharing between two Axioms
I have two Axiom MFDs networked via my SeaTalk backbone (One at an upper helm and the other in the pilot house) If I install charts via micro SD on one Axiom will they be available for viewing and navigation on the other?
Find all posts by this user
Quote this message in a reply
12-30-19, 01:01 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Chart sharing between two Axioms
Welcome to the Raymarine demerittj,

Q1. I have two Axiom MFDs networked via my SeaTalk backbone (One at an upper helm and the other in the pilot house) If I install charts via micro SD on one Axiom will they be available for viewing and navigation on the other?
A1. Negative. Please click here to view a FAQ addressing this subject. As indicated therein, the MFDs should be interfaced to one another via and Ethernet communications network, not a SeaTalkng / NMEA 2000 communications network to support data communications and resources sharing.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication