Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro Sonar vs CP470

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro Sonar vs CP470
01-29-20, 03:19 PM (This post was last modified: 01-29-20 04:04 PM by Chuck - Raymarine - Moderator.)
Post: #1
Grady330 Offline
Junior Member
**
 		Posts: 16
Joined: Jun 2017
Reputation: 0
[CA11] Axiom Pro Sonar vs CP470
1. Is there any reason at all to use a CP470 with an Axiom Pro?

2. Is the sonar in the Axiom Pro just as good as the CP470?

3. Would using the CP470 with the Pro give me any better performance?
Find all posts by this user
Quote this message in a reply
01-29-20, 04:10 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro Sonar vs CP470
Welcome to the Raymarine Forum Grady,

Please click here to view a thread in which I had previously addressed comparisons of the fishfinder performance of an external fishfinder sounder module to a MFD having similar internal fishfinder sounder circuitry. For those seeking maximum high power CHIRP sonar performance, a RVX1000, CP470, or CP570 external fishfinder sounder module would be recommended.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication