Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] New products compatible with ST60 Tridata

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New products compatible with ST60 Tridata
02-29-20, 01:18 PM (This post was last modified: 03-02-20 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
CaptainDon Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2020
Reputation: 0
[CA11] New products compatible with ST60 Tridata
The Westmarine site states that the Raymarine products which offer compatibility are just the 'i" products instead of the "ST" products with the same number.

I.e. An i60 is a full plug replacement for ST60

But from what I can tell, it's not.

I have a display fried ST60 which is just a Tridata. But the i60 is for sailboats. It looks more like the i50 is the replacement.

Suggestions, corrections???
Find all posts by this user
Quote this message in a reply
03-02-20, 11:53 AM (This post was last modified: 03-02-20 11:54 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] New products compatible with ST60 Tridata
Welcome to the Raymarine Forum Don,

The i60 Wind and i60 Close Hauled Wind instruments are designed to support being direct replacements for the ST60/ST60+ Wind and ST60/ST60+ Close Hauled Wind instruments respectively. The i50 Depth, i50 Speed, and i50 Tridata instruments are designed to support being direct replacements for the ST60/ST60+ Depth, ST60/ST60+ Speed, and ST60/ST60+ Tridata instruments respectively.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication