Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 7 and 9 cutout templates

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 7 and 9 cutout templates
03-31-20, 07:05 AM (This post was last modified: 03-31-20 09:26 AM by Chuck - Raymarine - Moderator.)
Post: #1
rshhome Offline
Junior Member
**
 		Posts: 12
Joined: May 2018
Reputation: 0
[CA11] Axiom 7 and 9 cutout templates
I need axiom 7 and 9 flush mount cutout templates / dimensions. I don’t see in the online manuals. Really need the dimensions and the [censored] sizes for the corners. Thanks
Find all posts by this user
Quote this message in a reply
03-31-20, 09:34 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 7 and 9 cutout templates
Welcome to the Raymarine Forum rshhome,

The Manuals and Documents for Element displays may be accessed via Raymarine's Manuals & Documents web page. The mounting templates for the Element displays may be found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication