Raymarine forum / Raymarine Forums / Marine Cameras v / Compatibility of FLIR M100 & M200 Series cameras with a/c/e/eS/gS-Series MFDs

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Compatibility of FLIR M100 & M200 Series cameras with a/c/e/eS/gS-Series MFDs
03-24-17, 02:27 PM (This post was last modified: 03-24-17 02:37 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Compatibility of FLIR M100 & M200 Series cameras with a/c/e/eS/gS-Series MFDs
Compatibility of FLIR M100 & M200 Series cameras with a/c/e/eS/gS-Series MFDs

FLIR maritime fixed mount thermal cameras introduced prior to the FLIR M100 & M200 Series thermal cameras relied upon an analog video interface to share thermal camera video and color low light camera video with compatible MFDs and monitors. The LightHouse II software for Raymarine's a/c/e/eS/gS-Series MFDs, as well as software for Rayamrine's retired E-Series Widescreen MFDs and G-Series systems, is exclusively designed to support integration with Raymarine T-Series and FLIR M-Series and MD-Series fixed mount thermal cameras having an analog video interface. Unlike the FLIR maritime fixed mount thermal cameras which preceded the FLIR M100 & M200 Series thermal camera's, command, control, and video imagery transmission are all communicated through the camera's Ethernet communications interface. Following the release and subsequent installation of LightHouse 3 software for the a/c/e/eS/gS-Series MFDs, these MFDs will feature support for FLIR's M100 & M200 Series thermal cameras.


RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication