Raymarine forum / Raymarine Forums / AIS v / AIS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS
04-28-17, 11:57 AM
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2017
Reputation: 0
AIS
How to connect C80 and Standard Horizon GX 2200
Find all posts by this user
Quote this message in a reply
04-28-17, 12:42 PM (This post was last modified: 04-28-17 12:43 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS
Welcome to the Raymarine Forum bpmarcum,

The diagram below from the GX2200's manual specifies how the GX2200 would be interfaced to any chartplotter having a NMEA 0183 communications interface which additionally supported AIS data process may be seen below:

[Image: attachment.php?aid=922]

The chart below addresses specifically how a C/E-Series Classic MFD would be interfaced to a GX2200.

[Image: attachment.php?aid=923]


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication