Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] i70s ,no voltage numbers

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] i70s ,no voltage numbers
06-09-19, 03:23 PM (This post was last modified: 06-11-19 12:49 PM by Chuck - Raymarine - Moderator.)
Post: #1
gerald Offline
Junior Member
**
 		Posts: 9
Joined: Jan 2018
Reputation: 0
[CA11] i70s ,no voltage numbers
Hi Chuck, I got my Maretron fuel tank sensor working.I followed your directions. Thank you.Another problem. I cannot get actual battery voltage level numbers to populate the digital battery screen on my i70s. The screen with dashes comes up instead of the numbers. Thanks.
Find all posts by this user
Quote this message in a reply
06-11-19, 12:53 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] i70s ,no voltage numbers
Welcome to the Raymarine Forum gerald,

The i70/i70S MFIDs are neither designed to report battery voltage sensed from power drawn from the SeaTalkng backbone nor from engine systems (the latter is alternator voltage). These MFIDs are designed to report battery voltage sensed from a NMEA 2000 battery monitoring device such as Maretron's DCM100 direct current / battery monitor. Are you interfaced a NMEA 2000 battery monitoring device(s) to your system's battery(ies)?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication