Raymarine forum / Raymarine Forums / PC & Mobile v / Recommended Serial to USB Adapters for use with Raymarine products

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommended Serial to USB Adapters for use with Raymarine products
06-26-17, 07:51 AM (This post was last modified: 06-26-17 07:53 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Recommended Serial to USB Adapters for use with Raymarine products
Recommended Serial to USB Adapters for use with Raymarine products

While Raymarine does not manufacture serial to USB adapters, such adapters are available from many third parties to support wired communications between computers and Raymarine products featuring a serial communications interface (i.e. E85001 PC/SeaTalk/NMEA 0183 Interface Module (retired) and products featuring a NMEA 0183 communications interface). Raymarine recommends SeaLevel's Model 2105R and Actisense NDC-4-USB for such wired communications between computers and Raymarine products having a serial communications interface. SeaLevel additionally offers opto-isolated serial to USB adapters for those seeking an adapter which is designed to prevent ground loops.

For those seeking NMEA 0183 to Wi-Fi, one of the most commonly recommended adapters is Digital Yacht's WLN-10 and WLN-20.


CRAFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication