Raymarine forum / Raymarine Forums / Multifunction Displays v / Raymarine A98 Help

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raymarine A98 Help
03-22-16, 11:28 AM
Post: #1
Kgonzalez23 Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2016
Reputation: 0
Raymarine A98 Help
Recently purchased a vessel that came with a A98. I was told that my setup should be able to show water temp but it is not at the moment. Transducer I am running is a Downvision CPT-100.

In what settings in the MFD do I find how to turn on water temp reading??
Find all posts by this user
Quote this message in a reply
03-22-16, 12:31 PM (This post was last modified: 03-25-16 08:04 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Raymarine A98 Help
Welcome to the Raymarine Forum Kgonzalez23,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
03-22-16, 01:07 PM (This post was last modified: 03-22-16 01:10 PM by Chuck - Raymarine - Moderator.)
Post: #3
Kgonzalez23 Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2016
Reputation: 0
RE: Raymarine A98 Help
I ended up finding it. Thanks Chuck.
Find all posts by this user
Quote this message in a reply
03-22-16, 01:10 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Raymarine A98 Help
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication