Raymarine forum / Raymarine Forums / Networking / System Integration v / Wireless NMEA 2000 connectivity

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wireless NMEA 2000 connectivity
10-19-17, 07:03 PM
Post: #1
JDGALE0070 Offline
Junior Member
**
 		Posts: 6
Joined: Aug 2017
Reputation: 0
Wireless NMEA 2000 connectivity
Chuck,
Is it possible to set up two nav stations with MFDs (and other NMEA instruments) in two widely separated locations and interface each of them to a wireless router so that NMEA cableing does not need to be run as a backbone between the two locations, yet they can still share data. If so, what would be needed in addition to two NMEA compatible wireless routers and each NMEA backbone?
Find all posts by this user
Quote this message in a reply
10-24-17, 03:49 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Wireless NMEA 2000 connectivity
Welcome to the Raymarine Forum JDGALE0070,

It is not uncommon for one to use a NMEA 2000 to Wi-Fi communications interface to support communications between a system and a computer or mobile device running a navigational software app. Unfortunately, I don't have any familiarity with any products which would support the end which you are seeking. In this case I would recommend searching for possible solutions and/or contacting manufacturers of NMEA 2000 to Wi-Fi devices for suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication