Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Fuel Manager not working

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Fuel Manager not working
02-04-18, 04:21 PM (This post was last modified: 02-09-18 10:24 AM by Chuck - Raymarine - Moderator.)
Post: #1
Shesby Offline
Junior Member
**
 		Posts: 7
Joined: Aug 2016
Reputation: 0
[CA] Fuel Manager not working
On my eS78 the Fuel Manager does not work. I have input the tank size in the setup but it does not appear on the Fuel Manager main page. I also selected "All Tanks Full" and nothing happens. It should be noted that I am using Fuel Flow Rate as the source of the fuel calculations. My engines do not provide the PGN12797 data.
Find all posts by this user
Quote this message in a reply
02-09-18, 10:20 AM (This post was last modified: 02-09-18 10:24 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Fuel Manager not working
Welcome to the Raymarine Forum Shesby,

Please verify the the MFD has been updated with LightHouse II v19.03 software. Please additionally verify that you have selected the option to use PGN12797 within the Fuel Manager's Set-up. If so, then please specify the number of engines, make / model of engine(s), and how they have been interfaced to your system. What instance ID number(s) is being transmitted with each PGN12797? Should you not know, then please click here to view a related FAQ addressing how one may inspect data present on a SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication