Raymarine forum / Raymarine Forums / Fishfinders v / [CA] Axiom 9 - Max Depth and 3D Sonar Issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 9 - Max Depth and 3D Sonar Issue
04-09-18, 10:54 PM (This post was last modified: 04-10-18 01:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
fishingfiend Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2018
Reputation: 0
[CA] Axiom 9 - Max Depth and 3D Sonar Issue
I have the Axiom 9 with the thru-hull RV-200 and I'm experiencing an issue where the depth and sonar cut out around 330'. I recently updated to 3.4 and testing over the weekend confirms it still cuts out. I have to head back into like 220' of water for the depth/sonar to start working again. Any thoughts on what maybe causing this and how to fix this problem?

Thanks in advance!
Find all posts by this user
Quote this message in a reply
04-10-18, 01:01 PM (This post was last modified: 04-10-18 01:06 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Axiom 9 - Max Depth and 3D Sonar Issue
Welcome to the Raymarine Forum fishingfiend,

Please click here to view a FAQ addressing the depths / distance ssupported by DownVision, RealVision 3D, and High CHIRP sonar. Which sonar channel had been selected when the reported symptom occurred? Does the problem persist when the vessel is drifting or operating at trolling speeds.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication