Raymarine forum / Raymarine Forums / Fishfinders v / [CA] adapter cable

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] adapter cable
05-07-18, 06:17 PM (This post was last modified: 05-08-18 02:48 PM by Chuck - Raymarine - Moderator.)
Post: #1
philemi Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2016
Reputation: 0
[CA] adapter cable
We are replacing an e127 with a E70482-00-LNC AXIOM Pro 12 S.

What adapter cable do I need to connect the existing A80171 D/T ducer to the new Axiom Pro S?
Find all posts by this user
Quote this message in a reply
05-08-18, 03:02 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] adapter cable
Welcome to the Raymarine Forum philemi,

Please click here to view a FAQ addressing transducers which may be mated to an Axiom Pro S MFD. Per the referenced FAQ, the Axiom Pro S MFDs may only be directly interfaced to CPT-S transducers. A CP370 50kHz / 200kHz transducer would need to be added to the system to support use of a 50kHz / 200kHz transducer such as the P319 ... and to that end, it would be recommended that the E66013 variant of the P319 or another CP370 compatible transducer be used.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication