Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] VHF to SeaTalkhs to Axiom 12 ?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] VHF to SeaTalkhs to Axiom 12 ?
06-25-18, 02:07 PM (This post was last modified: 06-26-18 03:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
rshhome Offline
Junior Member
**
 		Posts: 12
Joined: May 2018
Reputation: 0
[CA11] VHF to SeaTalkhs to Axiom 12 ?
I installed a new Axiom 12 and replaced my E80. Also a new Quantum. All works great... GPS, Radar, old sounder depth. Now I want to hook up my VHF to have the DSC distress linked to my Axiom 12 GPS. Can I install my current Standard Horizon Eclipse with DSC through my SeaTalkhs? Or do you have any suggestions. Thanks so much for the support!!!
Find all posts by this user
Quote this message in a reply
06-27-18, 07:54 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] VHF to SeaTalkhs to Axiom 12 ?
Welcome to the Raymarine Forum rshhome,

It is not possible to interface a VHF radio to the Raymarine system via and Ethernet (SeaTalkhs) communications network. However, it is possible to interface a DSC VHF radio to a powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the MFD has been interfaced to supply the DSC VHF radio with GPS data. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication