Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Position coordinates format

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Position coordinates format
06-24-18, 07:29 AM (This post was last modified: 06-26-18 08:05 AM by Chuck - Raymarine - Moderator.)
Post: #1
Pogo Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2017
Reputation: 0
[CA11] Position coordinates format
How do I change from standard DMS coordinate format to decimal, or DMM?
Find all posts by this user
Quote this message in a reply
06-26-18, 08:09 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Position coordinates format
Welcome to the Raymarine Forum Pogo,

Per the FAQ found here, Raymarine's MFDs (through those running LightHouse 3 v3.5.40) are exclusively designed to support DDD - MM.mmm units for latitude and longitude coordinates. The referenced FAQ also addresses how one may convert coordinate to other units.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication