Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Extension of cable on RCR SD card reader

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Extension of cable on RCR SD card reader
08-01-18, 09:56 AM (This post was last modified: 08-03-18 02:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
Maxim! Offline
Junior Member
**
 		Posts: 7
Joined: Apr 2018
Reputation: 0
[CA11] Extension of cable on RCR SD card reader
I have an Axiom Pro 9 display, but would like to add a RCR remote SD card reader inside the boat, so I don't have to install/remove the SD chart every time I use the boat.

So my question is:
Is it possible to extend the cable on the RCR SD card reader and if possible what cable do I need?
Visit this user's website Find all posts by this user
Quote this message in a reply
08-03-18, 02:40 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Extension of cable on RCR SD card reader
Welcome to the Raymarine Forum Maxim,

Raymarine does not offer any USB extensions, nor has it tested any in conjunction with the remote card readers. That said, it's worth trying a third party micro usb extension cable. The only downside is that such extensions will not be able to secure/seal themselves to the MFD's USB socket.
Find all posts by this user
Quote this message in a reply
08-05-18, 06:35 AM
Post: #3
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Extension of cable on RCR SD card reader
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication