Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Smartcontroller compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Smartcontroller compatibility
08-26-19, 03:45 PM (This post was last modified: 08-28-19 11:04 AM by Chuck - Raymarine - Moderator.)
Post: #1
Pawseidon Offline
Junior Member
**
 		Posts: 10
Joined: Jul 2019
Reputation: 0
[CA11] Smartcontroller compatibility
Is the Raymarine Smartcontroller compatible with Axiom RV and Axiom Pro RVX MFD's and an EV-400 autopilot?
Find all posts by this user
Quote this message in a reply
08-28-19, 11:06 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Smartcontroller compatibility
Welcome to the Raymarine Forum Pawseidon,

Yes. However, as the SmartController's base station supports SeaTalk rather than SeaTalkng communications, a SeaTalk to SeaTalkng Converter will need to be installed within the backbone to permit the base station to be interfaced to the system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication