Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] ES127 to Lighthouse 3 Transducer question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ES127 to Lighthouse 3 Transducer question
05-26-19, 04:18 PM (This post was last modified: 06-03-19 01:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
fairfaxdw Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2019
Reputation: 0
[CA11] ES127 to Lighthouse 3 Transducer question
I own a ES127 and am looking to upgrade the software to LH3. Will my installed 600w P319 transducer work with this new software upgrade?
Find all posts by this user
Quote this message in a reply
06-03-19, 02:04 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ES127 to Lighthouse 3 Transducer question
Welcome to the Raymarine Forum fairfaxdw,

Should the MFD have been successfully used with the fishfinder transducer in the past, then updating the MFD's software to LightHouse 3 should expected to have no impact upon the transducer's compatibility with the MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication