Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] P70R power off

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] P70R power off
05-28-19, 02:32 PM (This post was last modified: 06-03-19 04:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
Vussi Offline
Junior Member
**
 		Posts: 6
Joined: Aug 2018
Reputation: 0
[CA11] P70R power off
Is it ok to power p70R unit OFF by shutting Down power to Network, or do i have to use the power button on the unit?
Find all posts by this user
Quote this message in a reply
06-03-19, 04:22 PM (This post was last modified: 06-03-19 04:23 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] P70R power off
Welcome to the Raymarine Forum Vussi,

It is indeed quite acceptable to switch a p70S/p70RS/p70/p70R autopilot control head OFF by either by de-energizing the circuit which is supplying power to the autopilot's ACU (for ACUs which have been configured to supply power to the system's SeaTalkng / NMEA 2000 backbone) or by de-energizing the circuity which is supplying power to the SeaTalkng / NMEA 2000 backbone. To view more on this subject, Please click here to view a FAQ addressing the last power state memory feature found within Raymarine products.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication