Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Getting rid of wind wane on P70
06-03-19, 10:10 AM (This post was last modified: 06-04-19 12:15 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Getting rid of wind wane on P70
Have an Evolution Wheelpilot that I installed 3 years ago. When I ran my last update through the e7 mfd I started getting wind vane instead of track in the lower left ‘soft key’ position on the P70. I’ve tried resetting to factory default and rerunning setup to no avail. I don’t have a wind vane/instrument attached. The Seatalkng Network includes the e7, autopilot and Seatalk - Seatalkng converter attached to a ST60 tridata. Any suggestions on getting it to return to having the track ‘soft key’?
Find all posts by this user
Quote this message in a reply
06-04-19, 12:23 PM
Post: #2
RE: [CA11] Getting rid of wind wane on P70
Welcome to the Raymarine Forum Kevtev,

When the vessel type has been configured to a sailing craft, the Track/Wind Vane shortcut key will be defaulted to Wind Vane. However, this shortcut key may be redefined to Track via the command sequence MENU->MODE->SHORTCUT KEY->TRACK->SAVE.
Find all posts by this user
Quote this message in a reply
06-07-19, 10:47 PM
Post: #3
RE: [CA11] Getting rid of wind wane on P70
It worked, thanks again!
Find all posts by this user
Quote this message in a reply
06-10-19, 09:42 AM
Post: #4
RE: [CA11] Getting rid of wind wane on P70
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)