Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Multiple mfd power off option

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Multiple mfd power off option
07-16-19, 08:06 AM (This post was last modified: 07-19-19 11:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
Farmhand Offline
Junior Member
**
 		Posts: 23
Joined: May 2016
Reputation: 0
[CA11] Multiple mfd power off option
I am just curious , in a network of multiple mfds is there any way to power them all off from the master ? Thanks
Find all posts by this user
Quote this message in a reply
07-19-19, 11:59 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Multiple mfd power off option
Welcome to the Raymarine Forum Farmhand,

Q. in a network of multiple mfds is there any way to power them all off from the master ?
A. Negative. However, please click here to view a FAQ addressing how the MFD's last power state memory feature may be used to achieve the end which you may be seeking. Using this feature I simply switch the marine electronics on via my breaker panel onboard my be and never use the products' power buttons.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication