Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Evo Autopilot No Drive Detected alarm

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Evo Autopilot No Drive Detected alarm
08-19-19, 12:33 AM (This post was last modified: 08-23-19 03:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
Zimmerkl5 Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2019
Reputation: 0
[CA11] Evo Autopilot No Drive Detected alarm
Our 5 yrs old Evo Ap has been working great till our last Ocean passage. When we change from our Goto waypoint to Auto mode we occasionally get this alarm, about 1 of 3 times. When it occurs we go into Stansby mode, then are able to switch to Auto mode. Connections and drive appear tight. We will check for and perform an update tonight. Anything else we should check? We sail across the Indian Ocean in three weeks.
Find all posts by this user
Quote this message in a reply
08-23-19, 03:46 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Evo Autopilot No Drive Detected alarm
Welcome to the Raymarine Forum Zimmerkl5,

Please note the v3.02 for the EV-1/EV-2 CCUs was specifically released to address this symptom. It is accordingly recommended that the software within each of your Evolution autopilot components be updated with the latest available software and that the other actions specified within the FAQ found here be completed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication