Raymarine forum / Raymarine Forums / Autopilots v / Radio navigation interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radio navigation interface
05-26-16, 11:32 AM
Post: #1
Iris 1 Offline
Junior Member
**
 		Posts: 1
Joined: May 2016
Reputation: 0
Radio navigation interface
Hi, I have an Autohelm 800 tiller pilot and have recently installed a Lowrance Elite 5 GPS/ Depth Sounder. How can I configure these two instruments so that the Autohelm will take instruction from the GPS?
Thanks, Iris 1
Find all posts by this user
Quote this message in a reply
05-26-16, 04:02 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Radio navigation interface
Welcome to the Raymarine Forum Iris,

The AH800 is no longer supported. That said, the AH800 was designed to be a stand-alone autopilot. Being a stand-alone design, it lacked the SeaTalk and/or NMEA 0183 communications interfaces would permit later autopilot designs to be interfaced the GPS/chartplotting systems.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication