Raymarine forum / Raymarine Forums / Multifunction Displays v / [JB] [JB11] A50D no bottom reading

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] [JB11] A50D no bottom reading
06-04-20, 10:24 AM (This post was last modified: 06-18-20 09:04 PM by Jules - Raymarine - Moderator.)
Post: #1
Tiki91 Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2020
Reputation: 0
[JB11] A50D no bottom reading
My A50D has intermittent bottom reading .it comes and goes from depth reading to 3 blinking lines.have tried a reset with same results.is there an available replacement transducer if needed?i have the p58 witch seems to be discontinued.
Find all posts by this user
Quote this message in a reply
06-18-20, 09:08 PM
Post: #2
Jules - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 98
Joined: Oct 2019
Reputation: 0
RE: [JB11] A50D no bottom reading
Hello Tiki91,

Welcome to the Raymarine forum,

A replacement P58 transducer (A80566) is available and you will need an adapter cable E66066 to connect to your A50D.

Happy boating and kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication