[LW] [LW11] AR200 insted of EV-1 as autopilot vessel motion sensor?

[davitur]

Hello,
I own a boat where I already have an augmented reality package based on AR200 sensor and CAM210 camera. Now I want to add an autopilot. Apparently the AR200 motion sensor is very similir to EV-1/2 sensors used for autopilots. My question is, do I still need the EV1 sensor or is the AR200 capable to provide the required information?
Thanks in advance.
David.

[Louise - Raymarine - Moderator]

Dear davitur,

Thank you for your post.

To install our Evolution pilot system you will need the Evo sensor, the software in this is very different to the AR200 (there are also a couple of hardware differences).

The EV1 sensor is essential for the pilot.

Many Thanks
Louise

[davitur]

OK. My doubt is solved then. Many thanks for your quick answer Louise.

[Louise - Raymarine - Moderator]

You are welcome.