Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Update eS from Lighthouse 2 to 3

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Update eS from Lighthouse 2 to 3
11-14-19, 10:01 AM (This post was last modified: 11-14-19 02:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
SMS Offline
Jayssell
**
 		Posts: 4
Joined: Feb 2016
Reputation: 0
[CA11] Update eS from Lighthouse 2 to 3
In the download software for the eS Lighthouse 3 there is a read file with this ;
Add each ISO file onto a seperate uSD card - otherwise they will not install correctly

Does it matter which file is inserted into the eS first for the download to start and will the eS request the 2nd SD card file?
Thanks
Find all posts by this user
Quote this message in a reply
11-14-19, 02:40 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Update eS from Lighthouse 2 to 3
Welcome to the Raymarine Forum SMS,

I generally recommend that the cartography iso file be installed after loading the software update file when updating LightHouse 3 software within an eS/gS-Series MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication