E120w and E7d fishfinder using DCM300

[brent]

Chuck,
From reading your last post it appears possible to set up a fish finding system using an E120w and a E7d. Currently I have both these units and a DCM 300, not sure of the transducer. The DCM is connected to the 120wand both units are connected through the back bone.
I do have the fish finder running on the E120w and depth shows up on the E7D although no fish finder.
How would I set the system up to the have fish finding capabilities on both units? you mentioned using a E66066 adapter cable?
thank you for your input!

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Brent,

Unfortunately, it is not possible to do as you have suggested. Please click here to view a FAQ addressing this subject.