Raymarine forum / Raymarine Forums / Multifunction Displays v / Connection RMK-9 to a98 MFD can it be done

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connection RMK-9 to a98 MFD can it be done
06-04-17, 01:03 PM
Post: #1
abrackley Offline
Junior Member
**
 		Posts: 1
Joined: May 2017
Reputation: 0
Connection RMK-9 to a98 MFD can it be done
Can it be done?
Find all posts by this user
Quote this message in a reply
06-05-17, 11:02 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connection RMK-9 to a98 MFD can it be done
Welcome to the Raymarine Forum abrackley,

It is indeed possible to interface a RMK-9/10 to an a98 MFD. These products are designed to be interfaced to one another or to a HS5 RayNet Network Switch via an an appropriate length of RayNet (F) to RayNet (F) Cable. When interfaced to a an a/c/e/eS-Series MFD or HS5 RayNet Network Switch, the RMK-9/10 should be powered using the included power cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication