Raymarine forum / Raymarine Forums / Fishfinders v / chirp with high, medium and low

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
chirp with high, medium and low
03-30-16, 07:16 PM
Post: #1
str8fishon Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2016
Reputation: 0
chirp with high, medium and low
I'm currently running a a128, a98 and a97. I want to run a low, medium and high transducer. I was planning to run airmar b175l, b175m, and b175hw transducers with this setup. If it is possible how can it be accomplished? Can an additional pigtail be used or must another cp box be used to run the 3rd transducer? Thanks
Find all posts by this user
Quote this message in a reply
03-31-16, 08:34 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: chirp with high, medium and low
Welcome to the Raymarine Forum str8fishon,

Please note that the fishfinder transducer socket of the ax8 MFDs, eSx8 MFDs, and CP100 CHIRP/DownVision Sounder Module are exclusively designed to be interfaced to the transducers found here. In order to LM and MH CHIRP transducers, the a/c/e/eS/gS-Series MFDs (any model of these MFDs will support CHIRP fishfinder features when properly accessorized) would need to be interfaced to a CP470 or CP570 CHIRP Sounder Module and one or a pair of compatible CHIRP transducers. These transducers are designed to be directly plugged into a CP470's and C570's transducer sockets.

Please click here to view a FAQ addressing use of third party MFDs with Raymarine fishfinding products.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication