Raymarine forum / Raymarine Forums / Fishfinders v / Dragonfly pro 4 Charts no detail, blocky outlines

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly pro 4 Charts no detail, blocky outlines
07-03-17, 08:21 AM
Post: #1
TConner24w Offline
Junior Member
**
 		Posts: 2
Joined: Jul 2017
Reputation: 0
Dragonfly pro 4 Charts no detail, blocky outlines
my Dragonfly charts are no longer working correctly. This is with/without my updated Navionics card inserted. Seems like the the installed charts on the device is corrupted or something. When I put it in DEMO mode the Charts look awesome, but when I take it out of demo mode I get block edges and or coastlines. Doesn't show depths in charts or channels, this is in any detail mode. I may need to get a replacement card? any help would be awesome.

Thank you in advance.
Find all posts by this user
Quote this message in a reply
07-05-17, 10:41 AM (This post was last modified: 07-05-17 10:43 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dragonfly pro 4 Charts no detail, blocky outlines
Welcome to the Raymarine Forum TConner24w,

It appears that there is either an issue with the microSD memory card, the data stored on it, or with the MFD's memory card reader. Please click here to view a FAQ addressing this subject. Using the information specified within the referenced FAQ, have you verified that your display's memory card reader is operational? If so, have you configured the display to select Navionics Nautical Charts within the Chart application being viewed?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication