Raymarine forum / Raymarine Forums / Fishfinders v / Cpt100 not sending H2O temp to A75

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cpt100 not sending H2O temp to A75
07-07-17, 03:37 PM
Post: #1
ggaddy Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2017
Reputation: 0
Cpt100 not sending H2O temp to A75
My A75 showed water temp from Cpt100 Ok. Yesterday it stopped only displays dashes now. In transducer setting it shows no water temp data available. Any ideas on trouble shooting this?
Find all posts by this user
07-10-17, 12:11 PM
Post: #2
Dave - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 97
Joined: Mar 2017
Reputation: 0
RE: Cpt100 not sending H2O temp to A75
Hello ggaddy,

From the information you have provided, it sounds like the thermistor(the resistor that changes resistance based on temperature) has possibly failed.

I suggest you send in the transducer to our repair department for evaluation. You can use the following address to send in the unit:

Raymarine Repair Department
9 Townsend West
Nashua, NH 03063
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication