Raymarine forum / Raymarine Forums / Multifunction Displays v / Importing .gpx into Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Importing .gpx into Axiom
08-10-17, 03:32 PM
Post: #1
Captain Addison Offline
Junior Member
**
 		Posts: 20
Joined: Mar 2017
Reputation: 0
Importing .gpx into Axiom
Good afternoon
I am attempting to import a .gpx file into my Axiom. We have the latest update for Axiom, 3.1.xx.

It appears that the import is successful as I get the import successful message. However, after completing the process the route does not appear in the route list or the waypoints list.

The gpx file was created using a pc-based Predictwind application and appears to meet all of the parameters in waypoint/route/track constraints of the MFD.

What am I missing?

Addison
Find all posts by this user
Quote this message in a reply
08-17-17, 09:19 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Importing .gpx into Axiom
Welcome to the Raymarine Forum Addison,

Please click here to view a FAQ addressing related to this subject. Should the waypoints and routes within your GPX file adhere to the constraints specified within the referenced FAQ, then it would be recommended that your GPX file be attached to this thread for further analysis.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication