Raymarine forum / Raymarine Forums / Autopilots v / (DG) 300 and st 7001

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) 300 and st 7001
02-24-18, 11:53 AM (This post was last modified: 02-26-18 09:20 AM by Derek - Raymarine - Moderator.)
Post: #1
enrico Offline
Junior Member
**
 		Posts: 2
Joined: Sep 2017
Reputation: 0
(DG) 300 and st 7001
Hi
the word not pilot appears in the display 7001 we changed the 300 computer and we are wiring it what could be the problem?
Thanks
Find all posts by this user
Quote this message in a reply
02-26-18, 09:25 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) 300 and st 7001
Hi enrico

Thank you for your enquiry.

What computer have you replaced the 300 with? 'NO PILOT@ refers to the fact that the control unit can no longer communicate with the Course computer that you have fitted.

Can you check the cabling between the computer and the control unit, are there any loose connections, damaged cables, connections where the conductors are not making good contact?
How have you connected the computer to the control unit?

Check the following link too click here for more information
thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication