Raymarine forum / Raymarine Forums / AIS v / AIS 100 default condition

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS 100 default condition
04-20-16, 06:08 AM
Post: #1
murphy95 Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2016
Reputation: 0
AIS 100 default condition
I am about to fit an AIS 650 to my boat utilising an AIS100 splitter. If the AIS100 has no power on it (AIS system switched off), will the VHF tranceiver still be connected to the antenna? i.e. the splitter's default condition is to allow VHF transmission.
Find all posts by this user
Quote this message in a reply
04-20-16, 08:59 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS 100 default condition
Welcome to the Raymarine Forum murphy95,

In the specified case, the AIS100 Class B AIS Antenna Splitter will default to supporting VHF radio transmission/reception. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication