Raymarine forum / Raymarine Forums / Instruments v / [CA] Instrument Upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Instrument Upgrade
03-13-18, 03:01 PM (This post was last modified: 03-14-18 02:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
mcrow99 Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2016
Reputation: 0
[CA] Instrument Upgrade
I have an a75 MFD without sonar, and I'm looking to upgrade my sonar and wind instruments. I'm looking at the i70 display with wind, depth, and temp transducers. Will this talk to the a75 with Seatalk, or do I need the wind and depth control heads? I also have EV100 wheel pilot with ST70 control head that is connected to the a75.

Thanks,
Mike
Find all posts by this user
Quote this message in a reply
03-14-18, 02:32 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Instrument Upgrade
Welcome to the Raymarine Forum Mike,

The i70 MFID is indeed designed to communicate with an a75 MFD. Communications between these products will occur via the SeaTalkng / NMEA 2000 backbone. However, in addition to installing the wind, depth, and temp transducers, it will be necessary to install an iTC-5 Analog Instrument Transducer Converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication